Part Number Hot Search : 
FST6145 3256A FST6145 SRM4HF 204S1 2SA1240G M2020 HE700
Product Description
Full Text Search
 

To Download RACD60-1050 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  26 www.recom-electronic.com rev: 4/2011 please read application notes lightline ac/dc-converter with 5 year warranty racd60 racd60 60 watt pfc single output 60w class ii ac-dc led power supply dual mode cv or cc output power factor corrected universal input voltage range user adjustable current limit (/of) thermal feedback dimming (/tof) waterproof enclosure (/ip67) cul/ul8750 certified, ce marked high efficiency long 5 year warranty features led driver selection guide part output output factory set efficiency output number voltage range current range current (230vac) power (min - max) (min - max) limit typ. range racd60-4200* 11 - 13.5v 3570 - 4200ma 4.2a 85% 40-60w racd60-2400* 17 - 24v 2150 - 2500ma 2.4a 87% 30-60w racd60-2100* 21 - 28v 1400 - 2140ma 2.1a 89% 30-60w racd60-1400* 21 - 28v 1400 - 2140ma 1.4a 89% 30-60w RACD60-1050* 38 - 54v 700 - 1100ma 1.0a 89% 27-60w racd60-700* 38 - 54v 700 - 1100ma 0.7a 89% 27-60w * use suffix /of for open frame version (standard) - output current limit adjustable with on-board trimmer * use suffix /tof for open frame version with thermal feedback - output current limit externally adjustable. * use suffix /ip67 for waterproof potted version - fixed output currents only input voltage range all versions 90-264vac rated power 60 watts max. input frequency range all versions 50/60 hz power factor correction full load, 115vac/230vac > 0.9 input current (full load) 115vac/230vac 0.8a / 0.4a max. inrush current (cold start) 115vac/230vac 25a / 50a max. leakage current 230vac/63hz <0.7ma max. input fuse built-in 3.15a slow blow output current accuracy full load 5% output current adjust preset potentiometer (/of) 75% to 100% approx. external voltage (/tof) line voltage regulation ll to hl at full load 4% typ. load voltage regulation 60% to 100% load 5% typ. minimum load current see table output ripple and noise 20mhz limited,with 0.1f + 47f 5vp-p max. operating frequency all versions 65khz typ. efficiency at full load see table isolation voltage (60hz rms) input to output 3.75kvac / 1 minute input to filter ground 1880vac / 1 minute output to filter ground 500vac / 1 minute temperature coefficient all versions 0.02%/c typ. overload protection all versions 105% typ. short circuit protection continuous, hiccup, automatic restart description specifications (typical at 25c and after warm up time unless otherwise specified ) the racd60 is a compact universal input voltage 60w constant constant current power module suitable for driving high power leds. the led driver has a dual mode of operation:- cv mode: at loads below the preset current limit, the racd60 behaves as a fixed voltage source. cc mode: at loads above the preset current limit, the racd60 behaves as a fixed current source. thus the same power supply can be used with both cv and cc led modules. the racd60 series have a universal input voltage range with active power factor correction and are fully protected against output short circuit, over- load and over-temperature. three versions are available: a low cost open- frame with either internal (/of) or external user- adjustable current limit (/tof), and a sealed ip67 potted version (/ip67) with factory set output currents for outdoor or high humidity applications. ul 8750 certified cul 8750 certified* en 61347 certified rohs 2002/95/ec 6/6 e340696 ordering examples: racd60-700/of= open frame, adustable current limit preset to 700ma. RACD60-1050/tof=open frame,1050ma, adjustable 700-1050ma with ext. voltage or pwm signal. racd60-1400/ip67 = enclosed ip67 waterproof, non-adjustable 1400ma output. note: all currents within range are available - use racd60-xxxx/ip67 where xxxx is the desired fixed current e.g. racd60-900/ip67 = enclosed ip67 waterproof, non-adjustable 900ma output. * except 700ma/1100ma versions
www.recom-international.com 27 rev:4/2011 racd60 racd60 series lightline ac/dc-converter open circuit output voltage 4200ma 19vdc (zener diode clamp) 2400ma 25vdc typical values 2100ma/1400ma 29vdc 1050ma/700ma 55vdc output current adjust (/tof only) external voltage (1-10v) 10.5v max. external pwm (10v) 300hz max. operating temperature range free air convection, with derating -30c to +70c (refer to derating graphs) case temperature (/ip67) 85c max. storage temperature range -40c to +85c humidity non-condensing 95% rh max. environmental protection open frame (/of, /tof) indoor use only potted version (/ip67) ip67 pcb material plastic resin with fibreglass (ul94v-0) weight open frame (/of, /tof) 165g potted version (/ip67) 200g packing quantity 1pc emc en 55015, en61347-1, en61347-2-13 harmonics designed to meet en 61000-3-2 (class c, full load) and en 61000-3-3 mtbf (using mil-hdbk-217f, 25c) 583 x 103 hours certifications led lighting safety -all models ul8750 led lighting safety (canada) -1400, 2100, 2400 4200ma only cul8750 ce lvd directive -all models en61347 input/output connections /of pin header (suitable matching connector jst vhr or similar) . /ip67 340mm cable 20mm specifications cont. (typical at 25c and after warm up time unless otherwise specified ) input voltage derating (ta=25c) " " " "   )
$%  $  "  71  ' #  /tof output current adjustment  + 8!
 ' (  )
$%  $7<@4::!  ' ("   (" 3 4a.    ' ' ' ' ' ' 3 4a. 3 4a. 3 4a. the /tof offers the possibility to derate the output current with an external voltage or pwm signal. thermal feedback derating is an effective way to reduce the led current at high temperatures to avoid over-stressing the led. :'$ " (  -..= 2: #7  (# i  : , -..=@5b %g,3j..8*  - , 9= %& #  (# #( # 95b*   - , 33= %& #  (# #( # a5b* 4.:0 2  - -(#
 (#
 #   01   : 2: 6
:e
 0
g8 6621 6;6: #7  "#"# -..k 5 35 5 55 45 95 a5 j5 -.5 :7  (# :$ #  %b* 5.k
  # -. f * do not connect or disconnect the led load while the converter is on. this may damage the led or sharply reduce its life.
28 www.recom-electronic.com rev: 4/2011 racd60 racd60 series lightline ac/dc-converter "/' '. '/ 4 ', - 8- 
*6     " , - 9: 9: 9: ; ;" " ' "/' 8
% > !
racd60-xxxx/of and racd60-xxxx/tof  ,-*   "('0 < ,-*  ' "(+:/ " / , . , ,(, 7 ( 
*6 " / %* " %*= %   
   wire connections wire function brown vac in (l) blue vac in (n) red +vdc out black -vdc out dimension tolerance 0.25 mm racd60-xxxx/ip67 package style and pinning pin connections pin # /of /tof 1 vac in (l) vac in (l) 2 vac in (n) vac in (n) 3 nc thermal feedback 4 +vdc out +vdc out 5 -vdc out com filter ground connection via mounting holes dimension tolerance 0.25 mm package style and pinning
racd60 www.recom-international.com 29 rev:4/2011 lightline ac/dc-converter racd60 series application information leds are typically wired in series to make a string of leds and then the strings can be wired in parallel to generate enough li ght. if only two or three strings are wired in parallel then it is recommended to add resistors (e.g. 0.5r) to each string to help balance out the led currents in each string. all strings must share a common heatsink for better current matching. -(#
 (#
 -(#
 (#
 -(#
 (#
 #  - #   #   a typical 1w high brightness white led has a forward voltage of around 3.3v at its operating temperature and draws 350ma. thus each led actually draws about 1.15w. similarly, 3w white leds have usually the same forward voltage but can be run at 700ma or more. usi ng the led datasheet specification, the optimum led arrangement and the best driver for each application can be worked out. the tables below show some examples . other led combinations may have different f orward voltages at their recommended operating currents. 1w leds led arrangement ac/dc driver 24 2 strings of 12 racd60-700 26 2 strings of 13 racd60-700 28 4 strings of 7 racd60-1400 30 3 strings of 10 RACD60-1050 33 3 strings of 11 RACD60-1050 35 5 strings of 7 racd60-2100 35 7 strings of 5 racd60-2400 36 3 strings of 12 RACD60-1050 39 3 strings of 13 RACD60-1050 42 3 strings of 14 RACD60-1050 42 7 strings of 6 racd60-2400 42 14 strings of 3 racd60-4200 45 3 strings of 15 RACD60-1050 3w leds led arrangement ac/dc driver 12 12 in series racd60-700 14 2 strings of 7 racd60-1400 18 3 strings of 6 racd60-2100 18 6 strings of 3 racd60-4200 high power leds led arrangement ac/dc driver cree cxa2011 single array RACD60-1050 cree xm-l 6 in series racd60-2100 lumiled rebel 13 in series racd60-700 osram dragon 14 in series RACD60-1050 bridgelux rs single array racd60-2100 helieon single module racd60-1400 derating graphs " " " "   
   3
%      # 71  ' 2#  "#  "  ( = +  " " " "   
   3
%      # 71  ' 2#  "#  "  ( = +  racd60 -xxxx/ip67 racd60 racd60 -xxxx/of -xxxx/tof


▲Up To Search▲   

 
Price & Availability of RACD60-1050

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X